Here for the Grenadier
If you are here, you must own an INEOS Grenadier. Built on purpose, the Grenadier is a retro-modern engineering marvel: a contemporary 4x4 in all the right places, styled like a classic.
The Overhead Mounted Panel
This panel solves the problem of where to mount your cell phone (and GPS nav, and CB radio, and camera, etc.) You can now store (and charge) your phones while keeping them out of the way on a genuine RAM mount. there are also 2 30mm neodymium magnets: perfect for attaching a flashlight, CB microphone or anything that is frequently used in your vehicle. Items are all kept in line of sight, but don't interfere with rear view mirror visibility. Click on the product image below for more information.
These overhead mounts solve the issue of phone storage in the INEOS: You can now store (and charge) your phone while keeping it out of the way by mounting it on RAM mount. There are two mounting points so you can attach a tablet, camera, GPS unit or anything else that will fit on a ball mount. As a new feature, there are also 2 30mm neodymium magnets: perfect for attaching a flashlight, CB microphone or anything that is frequently used in your vehicle. Items are all kept in line of sight, but don't interfere with rear view mirror visibility.
Features:
All .190" 6061-T4 CNC machined Aluminum plate and lathe turned and machined Delrin wire cover: no cheap injection molding or 3d printing.
2 genuine RAM mounts (B Size)
2 30mm neodymium magnets, reversable polarity, 18lbs direct pull force: Designed for Guardian Lights, but can hold accessories or cables.
Easy 20 minute installation: and can be reverted back to stock appearance for lease returns.
Hides charging or accessory wires out of the way when not in use.
Can be mounted in 2 orientations. (magnets forward or ram mounts forward)
100% American-made, craft quality!
Considerations:
Will require a small hole drilled in the plastic sub panel if you want to power your accessories.
Video walkthrough instructions included.
Recommend wiring to INT 1 12v source switch.
Ships flat rate: $9.75 domestic.
Recommended accessories:
Works with any B mount RAM components : Amazon Link
Cell phone charger shown: Amazon Link or Magsafe Amazon Link
Guardian Angel Elite Safety Light (many colors available) Amazon Link
Steering Wheel Guards
The Grenadier does have its quirks! Despite a great design overall, the buttons on the steering wheel are far too likely to be pressed accidentally, causing the microphone to activate and relentlessly insist on answering an un-asked question. Far too often, this happens at the worst possible time. Octodyne has a button guard set that easily solves this problem, so you don’t activate the buttons with the palm of your hand while spinning the wheel. Machined from 6061 aluminum, it’s just tall enough to guard the buttons and flat enough to be unobtrusive. Plus, it fits in the 4 existing mounting holes: installation takes under 2 minutes.
If you’d like to print your own steering wheel guard, this file is the same as the CNC machined billet aluminum product Octodyne makes. Note that you will also need 4 M2 Screw Cutting hex socket head screws for installation, as the OEM screws are not long enough. (grab extra screws, because you’re going to drop at least one between the seat and console while trying to install them!)
Have you ever accidently bumped the Mic or OK button on your Grenadier steering wheel? If the answer is “no” you obviously have never driven one!
This guard completely solves the problem of accidently keying your “microphone” and “OK” button. Includes 2 guards and 4 mounting screws for a factory perfect look.
Have you ever accidently bumped the Mic or OK button on your Grenadier steering wheel? If the answer is “no” you obviously have never driven one!
This guard completely solves the problem of accidently keying your “microphone” and “OK” button. Includes 2 guards and 4 mounting screws for a factory perfect look.
Keyhole LED Light
Another oversight on the Grenadier is the lack of an LED convenience light above the keyhole. When it’s dark, the only way to insert the key is to fumble around by feel, because it’s impossible to see where to insert the key.
But Octodyne has an easy remedy for this problem. It is also extremely easy to install: installation takes under 5 minutes, and is “plug and play.” Simply mount the light using the (included) 3M tape, and run the wire down through the steering column, then connect in line with the existing footwell light. Once installed, the keyhole light will automatically come on when the door is opened and when the interior light button is depressed, and the existing footwell light continues to function as normal. The design also features a channel so a USB charging cable can be run up from the footwell to right side of the console. Mounting is with double stick adhesive, however there are two holes if you prefer to screw the piece into the dashboard. Note that we now have both Left Hand Drive and Right Hand Drive products available. FOR INTERNATIONAL SHIPPING please visit: https://www.etsy.com/shop/Octodyne
Fully CNC machined from aluminum billet, this solves the “where is the keyhole” problem, and ties into the existing footwell lighting with zero modifications to your vehicle. The LED has an internal, integrated resistor and will work from 5v-16v DC. Comes supplied with genuine 3M VHB mounting tape, can also be mechanically fastened. The surface has been treated with ProtectaClear to ensure durability and corrosion protection. There is plenty of clearance, so it does not interfere with turning the key. The wiring harness simply “clips on” to the existing wiring of your footwell light. Ships only via USPS express service to addresses within the US. If you are an international destination, please check our ETSY shop for international shipping. https://www.etsy.com/shop/Octodyne
Please note: this is for vehicles with the driver on the Left Hand side. See our ETSY store for RHD.
Fully CNC machined from aluminum billet, this solves the “where is the keyhole” problem, and ties into the existing footwell lighting with zero modifications to your vehicle. The LED has an internal, integrated resistor and will work from 5v-16v DC. Comes supplied with genuine 3M VHB mounting tape, can also be mechanically fastened. The surface has been treated with ProtectaClear to ensure durability and corrosion protection. There is plenty of clearance, so it does not interfere with turning the key. The wiring harness simply “clips on” to the existing wiring of your footwell light. Ships only via USPS express service to addresses within the US.
Note that this listing is for Right Hand Drive: this is the correct option if you are located in Australia, the United Kingdom, New Zealand, etc. From Octodyne.com, we only ship domestically to the USA If you are an international destination, please check our ETSY shop for international shipping. https://www.etsy.com/shop/Octodyne
Find the keyhole!
In the dark, it’s nearly impossible to find where to put the key!.
